BuyerRank is reader-supported. We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Prices and availability are accurate as of the date of publication and can change at any time — please check the retailer for the current price. Learn more. Written by Victoria — how we choose what to recommend.
- Our quick picks
- The five attachment points, ranked by how well they actually work
- Safety, and one item that is serious
- Heat is the other thing nobody accounts for
- Magnetic mounts: what works and what does not
- Other things worth checking
- The best car phone mounts right now
- Second tier
- Cut from the list, and the reason
- How to choose a car phone mount
- Getting it installed so it stays installed
- Frequently asked questions
Our quick picks
Ranked by what each one is best at, not by a score we made up. Ratings are what the product showed on Amazon when we last checked — how we rank.
- Suction-cup base with a sticky gel pad, telescoping arm, spring-loaded one-touch cradle.
- This is the mount that has quietly become the default answer, and the review count is why: almost fifty thousand people have put one on a windshield and reported back.
- The arm plus cradle is a fair amount of mass hanging off one suction cup, and on a hot day a poorly cleaned windshield will let it fall.
- HaloLock magnetic array, vent clip with a support hook, no charging.
- If you have an iPhone 12 or newer and a MagSafe case, this is the mount that turns getting in the car into a one-second gesture.
- Vent mounts put your phone directly in the airflow, so in summer you are blowing hot air across it before the A/C catches up, and in winter you are heating it.
- Expanding CD-slot anchor, telescoping arm, same one-touch cradle.
- If your car still has a CD slot you never use, you are sitting on the best mounting point in the vehicle and most people never think of it.
- You cannot use the CD player, and on a few vehicles the slot is angled steeply enough that the mount tilts in a way the ball joint cannot fully correct.
- Short-arm suction mount with the one-touch cradle, no telescoping extension.
- The full-size Easy One Touch is a fairly large object sitting on your glass.
- There is no extension, so if your windshield rakes away steeply the phone stays out there where you cannot comfortably reach it.
- 15W magnetic wireless charging, active cooling fan, vent mount.
- Wireless charging in a car is a truly hard problem, because wireless charging makes heat and a car interior is already hot, and a warm phone throttles its own charging rate to protect the battery.
- The fan is audible in a quiet cabin, and it is another cable to route and another draw on your accessory socket.
- Expanding cup-holder base, long adjustable gooseneck, one-touch cradle.
- A cup holder is the most solid mounting point in almost every car, and it involves no adhesive, no suction, and nothing attached to the glass.
- You lose a cup holder, and the long neck means visible wobble on rough roads.
The full case for each pick, the numbers that matter and the downsides, are all below.
Car phone mounts do not fail at the phone end. They fail at the car end.
Every listing photographs the cradle and talks about grip strength, and the grip is almost never the problem. What actually happens is that the suction cup lets go of the dashboard on a hot afternoon, the adhesive disc peels off the textured plastic it was never designed for, the vent clip snaps a louvre or slowly rotates downward under the weight of a large phone, or the whole assembly develops a wobble that makes the screen unreadable over every expansion joint.
So the useful question is not “will this hold my phone?” It is “what am I attaching this to, and will that surface hold it?” Your car offers a small number of attachment points and they are not equally good.
The five attachment points, ranked by how well they actually work
Cup holder — the most reliable
A cup holder is a rigid molded recess bolted to the center console, and an expanding base wedged into it is mechanically locked in place. Nothing to peel, nothing to lose suction, and heat does not affect it. It is also low, which means the phone is out of your sightline entirely — good for legality and bad for glanceability, so it suits audio and navigation prompts rather than reading a map.
The trade is obvious: you lose a cup holder, and in a car with two you have just halved your drinks capacity. But for reliability this is the best attachment point in a car and almost nobody picks it first.
CD slot — the best of the high mounts
If your car still has a CD slot, it is an excellent mounting point: a rigid metal-framed opening at dashboard height, in the middle of the car, where an expanding blade locks solidly. The phone sits high enough to glance at, the mount does not obstruct the windshield, nothing adhesive is involved, and it never lets go in heat.
The obvious problem is that new cars have not had CD slots for years. If yours does, this is the mount to buy and the rest of this section is academic.
Suction cup on the windshield — works well, may be illegal
Glass is the one surface a suction cup likes: smooth, non-porous, rigid. A good suction mount on a clean windshield holds well for months. It is also the position where the phone is easiest to glance at without looking away from the road, which is a real safety argument.
The problem is legal rather than mechanical. Many U.S. states have vehicle codes restricting objects that obstruct the driver’s view through the windshield, and the rules vary considerably — some prohibit anything, some permit a device within specified zones such as a small square in a lower corner or directly behind the mirror, and some do not address it. Check your own state’s rules before mounting anything on your windshield, because this is a routine traffic stop in some places and a non-issue in others. When in doubt, mount low and out of the swept area of your primary view.
Adhesive or suction on the dashboard — the most common failure
Dashboards are the worst surface in the car for both suction and adhesive, and this is where most disappointment comes from. Modern dashboards are textured, grained, soft-touch coated and often slightly curved — a suction cup cannot seal against a grained surface, and adhesive that grips a soft-touch coating frequently pulls the coating off when removed.
Mounts of this kind usually supply an adhesive disc to stick to the dash, giving the suction cup a smooth surface to grip. That works, and it commits you: the disc is semi-permanent, and removing it from a soft-touch dash can leave a mark. Heat is the other enemy — a parked car in summer can exceed the temperature at which adhesives creep and suction relaxes, and a mount that falls into the driver’s footwell while you are moving is a genuine hazard rather than an inconvenience.
Air vent clip — convenient, and hard on both the vent and the phone
Vent mounts are quick, cheap and need nothing adhesive, which is why they are popular in rentals and shared cars. Three real problems. Vent louvres are thin plastic and a heavy modern phone levers on them — louvres snap, and vents sag so the phone slowly tilts downward. The mount blocks the vent it is clipped to. And the phone sits directly in the airflow: on a heater vent in winter it gets hot, and on an air conditioning vent in a humid summer it can get condensation.
For a light phone, a short trip or a hire car, a vent mount is fine. For a large phone you use daily, it is the least durable option here.
Safety, and one item that is serious
Never mount anything in an airbag deployment path
This is the one that matters most. The passenger airbag deploys upward through a seam in the top of the dashboard, and side curtain airbags deploy down the pillars and along the roofline. Anything mounted in those paths becomes a projectile traveling at airbag deployment speed, and it also interferes with the airbag doing its job. Do not mount a phone holder on the passenger airbag panel, on the A-pillar, or anywhere across the upper dash where a seam suggests a deployment door.
Look for the molded seam lines on your dashboard — the panel that will open is usually outlined — and mount well clear of them. Your owner’s manual states where the airbags are.
Keep it out of the steering and pedal area
A mount or a cable that can fall into the footwell and roll under a pedal is a serious hazard. Route charging cables along the console and secure them, and do not mount anything where it can drop into the driver’s footwell. This is also an argument against dash suction mounts in hot climates.
Mount it so you glance, not look
The whole point of a mount is that the phone is where a quick glance reaches it, in roughly the same plane as your instrument cluster and your mirrors, rather than in your lap. A mount positioned low and off to the side requires you to look away from the road properly, which is worse than not having one. Position for a two-second glance.
And the obvious one
A mount makes navigation and audio safer. It does not make texting safe. Handheld and hands-free phone use while driving is regulated differently in different states and many now prohibit holding a phone at all, with distracted driving a leading factor in crashes. Set the destination before you move, use voice control, and let notifications wait.
Heat is the other thing nobody accounts for
A car interior in summer can reach temperatures far above anything a phone is designed to sit in, and a phone in direct sun on a windshield mount is the worst case in the whole vehicle. Phones throttle their processors, screens dim or black out as a protective measure, and sustained high temperature permanently reduces lithium battery capacity.
Wireless charging makes this worse, because inductive charging is inefficient and the losses come out as heat in the phone. A 15W wireless charger on a phone that is already at 45℃C in a sunny car is the situation where phones shut down mid-journey. This is why the better magnetic car chargers now include a small cooling fan — it is an unglamorous engineering response to a real problem, not a marketing feature, and on a hot-climate commute it is the difference between a charging phone and a phone that stops.
Practical measures: mount in shade rather than sun where you have the choice, take the phone with you rather than leaving it mounted in a parked car, and remove the case if a phone is getting hot while charging.
Magnetic mounts: what works and what does not
Magnetic mounting is the best thing to happen to car mounts in years, because it removes the mechanical clamp entirely — you touch the phone to the mount and it is held, one-handed, in one motion. The caveats are specific.
- Magnet grade matters. Look for N52 or similar high-grade neodymium and a full ring of magnets rather than a couple of blocks. A weak magnet with a heavy phone slides down over bumps.
- Your case is the variable. A MagSafe-compatible case with its own magnet ring works perfectly. A thick case, a case with a metal plate, or a wallet case will weaken or break the hold. A plain thick case with no magnets means the phone barely attaches at all.
- Android phones generally need help. Most Android phones have no magnet ring, so you either use a magnetic case or stick a metal plate to the phone — and a metal plate blocks wireless charging, which is a real trade. Some newer phones support the Qi2 standard with built-in magnets, which solves it.
- Magnets do not harm a modern phone. The old warnings about magnets and phone storage do not apply to solid-state memory. Magnets can interfere with a compass reading briefly and can affect credit cards in a wallet case, which is a reason not to use a wallet case with a magnetic mount.
Other things worth checking
- Whether it works one-handed. The single best usability feature in a mount is being able to insert and remove the phone with one hand without looking. Spring-loaded cradles with a release button, and magnets, both do this. A two-handed clamp does not.
- Whether it fits your phone in its case. Large phones in thick cases defeat many cradles, and grip rings, pop sockets and camera bumps all interfere. Check the stated maximum width against your actual phone plus case.
- Arm length and joint stiffness. A long telescopic arm gives you positioning freedom and also leverage, which means vibration. A short arm is steadier. Ball joints loosen over time, and a mount that will not hold its angle after a year is a mount you will replace.
- Cable routing. A mount with a channel or a magnetic clip for the charging cable keeps the cable out of your gear selector. Small feature, used constantly.
- Whether the charger needs its own power. Wireless charging mounts need a proper power supply — often a specific wattage of car adapter — and plugging one into an underpowered socket means slow charging or none. Check what is in the box.
- Landscape and portrait. Most people want portrait for navigation and landscape occasionally for video at a standstill. A head that rotates freely is more useful than two fixed positions.
The best car phone mounts right now
Every rating below was read off the live Amazon listing at the time of writing, and we only included mounts holding 4.3 stars or better with enough reviews to mean something. A 5.0-star mount with three dozen reviews tells you almost nothing; a 4.4-star mount with nearly fifty thousand tells you a great deal.
1. iOttie Easy One Touch Signature (Dash & Windshield) — best overall
4.4 stars, 48,988 ratings. Suction-cup base with a sticky gel pad, telescoping arm, spring-loaded one-touch cradle.
This is the mount that has quietly become the default answer, and the review count is why: almost fifty thousand people have put one on a windshield and reported back. The one-touch mechanism is the part that matters day to day — you push the phone against a trigger plate with the back of your hand and the arms close on their own, so you can seat the phone without looking away from the road for more than a moment. Getting it out is a single squeeze.
The base is the other half of the story. The gel pad on the suction cup is washable, which sounds like a footnote until you realize that a suction cup loses grip because of dust, not because the rubber wore out. Rinse the pad in warm water, let it dry, and the cup grips like new. That is the difference between a mount that lasts four years and one you throw away in August. The telescoping arm extends far enough to bring a phone off the windshield and toward you, which is what makes it usable on a deep dashboard where a short mount leaves the phone out of reach.
- Type: suction cup for windshield or dash, telescoping arm, mechanical cradle
- Why it works: the one-touch cradle and the washable gel pad solve the two things that actually make people give up on mounts
- Best for: almost anyone who wants one mount that works in any car and with any phone, case on
Where it disappoints: the arm plus cradle is a fair amount of mass hanging off one suction cup, and on a hot day a poorly cleaned windshield will let it fall. Clean the glass with isopropyl alcohol, not glass cleaner, before you mount it. On a steeply raked windshield the phone can end up further from your hand than you would like even with the arm extended. And in a handful of states, anything attached to the windshield is technically an obstruction — use the dash pad instead if that applies where you drive.
Check the iOttie Easy One Touch Signature on Amazon →
2. ESR MagSafe Car Mount (vent) — best MagSafe mount
4.5 stars, 7,965 ratings. HaloLock magnetic array, vent clip with a support hook, no charging.
If you have an iPhone 12 or newer and a MagSafe case, this is the mount that turns getting in the car into a one-second gesture. You bring the phone near, the magnets take over, and it lands aligned. No arms, no squeeze, nothing to aim. The magnetic array here is strong enough that the phone stays put over expansion joints and speed bumps, which is the only test that matters — a weak magnetic mount is worse than no mount, because it drops the phone into the footwell exactly when you are least able to deal with it.
The vent clip includes a hook that rests on the vent fin from behind rather than just pinching it, which spreads the load and stops the whole assembly from rotating downward under the phone’s weight. That hook is the reason this mount holds where cheaper vent clips sag. Being on the vent also means the phone sits high in your field of view without touching the windshield, which sidesteps the obstruction question entirely.
- Type: magnetic (MagSafe), vent clip mount, passive — no charging
- Why it works: strong magnets plus a support hook that keeps the vent clip from rotating
- Best for: iPhone 12 and newer with a MagSafe case, in a car with horizontal vent fins
The drawbacks: vent mounts put your phone directly in the airflow, so in summer you are blowing hot air across it before the A/C catches up, and in winter you are heating it. Horizontal fins are required — round or vertical vents will not work. Android phones need a magnetic plate stuck to the case, or a Qi2 phone and case. And a thick or a metal-plated third-party case can cut the holding force dramatically even if it claims MagSafe compatibility.
Check the ESR MagSafe Car Mount on Amazon →
3. iOttie Easy One Touch Signature (CD Slot) — best rigid high mount
4.5 stars, 5,639 ratings. Expanding CD-slot anchor, telescoping arm, same one-touch cradle.
If your car still has a CD slot you never use, you are sitting on the best mounting point in the vehicle and most people never think of it. A CD slot is a rigid, factory-installed opening in the center of the dash at roughly the same height as the infotainment screen. A mount anchored there does not shift, does not come loose on a hot day, and puts the phone almost exactly where you are already glancing. The anchor expands inside the slot with a thumbscrew and simply does not move.
The trade-off is that the position is fixed in the center, which may be further right than you would like if you sit well back. The telescoping arm recovers most of that. And you do lose the CD player while the mount is installed, though the anchor comes out cleanly and leaves nothing behind.
- Type: CD-slot anchor, telescoping arm, mechanical one-touch cradle
- Why it works: a rigid factory opening beats any adhesive or suction cup, and the height is already right
- Best for: older cars and trucks that still have a CD slot and a shallow dash
The catch: you cannot use the CD player, and on a few vehicles the slot is angled steeply enough that the mount tilts in a way the ball joint cannot fully correct. On cars where the slot sits low, this puts your phone lower than a windshield mount would, which is the wrong direction for a quick glance. Check that your slot is horizontal and roughly dash-height before you buy.
Check the iOttie CD Slot mount on Amazon →
4. iOttie Easy One Touch Mini (Dash & Windshield) — best compact mount
4.5 stars, 1,393 ratings. Short-arm suction mount with the one-touch cradle, no telescoping extension.
The full-size Easy One Touch is a fairly large object sitting on your glass. The Mini keeps the cradle mechanism and the washable gel suction base but drops the telescoping arm, which makes it visually much smaller and cuts the leverage on the suction cup roughly in half. Less leverage means less chance of the whole thing letting go on a hot afternoon, which is a real engineering advantage rather than just a cosmetic one.
This is the mount to buy if your dashboard is shallow, if you sit close to the wheel, or if you simply do not want a piece of hardware dominating your windshield. In a small car the Mini often puts the phone in a better place than the full-size version does, because the full-size arm was designed to reach across a deep truck dash.
- Type: compact suction cup mount, one-touch cradle, fixed short arm
- Why it works: the same cradle and washable pad with far less leverage on the suction cup
- Best for: small cars, shallow dashboards, and anyone who finds the full-size mount too bulky
Where it falls short: there is no extension, so if your windshield rakes away steeply the phone stays out there where you cannot comfortably reach it. It is the wrong choice for a truck or a van with a deep dash. The smaller footprint also means slightly less suction area, so surface prep matters even more here than on the full-size model.
Check the iOttie Easy One Touch Mini on Amazon →
5. ESR MagSafe Car Charger with CryoBoost — best charging mount
4.4 stars, 808 ratings. 15W magnetic wireless charging, active cooling fan, vent mount.
Wireless charging in a car is a truly hard problem, because wireless charging makes heat and a car interior is already hot, and a warm phone throttles its own charging rate to protect the battery. That is why so many magnetic car chargers feel slow: they are not slow, they are hot. The fan on this one is the honest engineering answer — it pulls heat off the back of the phone so the charging circuit never has to back off, which is how you actually get the full 15W to land instead of just being advertised.
The practical case for a charging mount is navigation. Turn-by-turn directions with the screen bright is the most demanding thing most people ask of a phone, and it will outrun a passive mount on a long drive. If you commute with maps running, this pays for itself in not arriving somewhere at fourteen percent.
- Type: magnetic wireless charger with active cooling, vent mount
- Why it works: the fan keeps the phone below the temperature where it throttles its own charging
- Best for: long commutes with navigation running, iPhone 12 and newer with a MagSafe case
What owners complain about: the fan is audible in a quiet cabin, and it is another cable to route and another draw on your accessory socket. Getting 15W requires a charger and cable that can actually supply it — plug this into an underpowered adapter and you get trickle charging with a fan noise. Wireless charging is also less efficient than a cable, so if your only goal is the fastest possible charge, a passive mount plus a short cable still wins. Fewer than a thousand reviews means less long-term data than the other mounts here.
Check the ESR CryoBoost charging mount on Amazon →
6. iOttie Easy One Touch 5 (Cup Holder) — best where windshield mounts are restricted
4.3 stars, 443 ratings. Expanding cup-holder base, long adjustable gooseneck, one-touch cradle.
A cup holder is the most solid mounting point in almost every car, and it involves no adhesive, no suction, and nothing attached to the glass. The base expands against the walls of the holder and becomes effectively part of the car. For anyone driving in a state that treats windshield attachments as an obstruction, or in a vehicle with a dashboard so textured that nothing sticks to it, this is the answer.
The catch is geometry: the cup holder is low and behind you, so the mount has to reach a long way up and forward. iOttie handles this with a long adjustable neck, and it works, but a long neck is also a lever, and a lever transmits every bump in the road to the phone. Expect more wobble than a windshield mount. For a commute on decent pavement it is a non-issue; on a washboard gravel road it is annoying.
- Type: cup-holder base with expanding grip, long adjustable neck, one-touch cradle
- Why it works: the most rigid anchor point in the car, with nothing stuck to any surface
- Best for: states that restrict windshield mounts, textured dashboards, and rental or work vehicles
The downside: you lose a cup holder, and the long neck means visible wobble on rough roads. In cars with recessed or unusually deep cup holders the base may not have enough wall to grip. Getting the neck bent into a position where the phone is both visible and not blocking the shifter takes some patience the first time, and a small number of cars simply do not have room for it.
Check the iOttie cup holder mount on Amazon →
Second tier
Peak Design Universal Bar Mount
4.8 stars, 272 ratings. The highest-rated mount we looked at, but with only a couple hundred ratings we cannot put it in the main list on the evidence available. It is built around Peak Design’s own magnetic SlimLink system rather than MagSafe, which means it grips harder than a MagSafe mount but requires one of their cases or an adhesive adapter. It clamps to a bar rather than a vent or windshield, which makes it interesting for motorcycles, bicycles, off-road cages and utility vehicles rather than a family sedan. If you are already in the Peak Design ecosystem it is an easy recommendation; if not, buying into a proprietary case standard for one car mount is a bigger commitment than it looks.
Check the Peak Design Universal Bar Mount on Amazon →
Cut from the list, and the reason
- Tackform Enduro 20LITE — a perfect 5.0 rating, but on only 36 ratings. A handful of enthusiastic early buyers is not evidence, and we will not rank a product on it.
- Scosche MagicMount Pro2 variants in the 3.8-star range — the brand is well known and the design is clever, but the ratings on the listings we checked were well below our floor.
- Generic cup holder mounts at 4.7 stars with 61 ratings — the rating looks better than anything in our list, but the sample is too small and the seller has no track record to check.
How to choose a car phone mount
Work through these in order and the decision usually makes itself.
Step 1: decide where it can legally and physically go
Look at your vents first. Are the fins horizontal and sturdy, or round, vertical, or flimsy plastic slats? If they are horizontal and solid, a vent mount is available to you. Then look at your dashboard: is there a flat area within arm’s reach, or is it all curved and textured? Then check whether you have an unused CD slot. And check your state’s rules on windshield obstructions, which vary and which are enforced unevenly but are worth knowing.
Step 2: decide whether you want magnetic or mechanical
Magnetic is faster and more pleasant, every single time you get in the car. Mechanical is more secure on rough roads and works with any phone and any case. If you have a MagSafe iPhone and drive on reasonable pavement, go magnetic. If you have an Android phone, a thick case, a wallet case, or you drive on bad roads, go mechanical.
Step 3: decide whether you need charging
If you run navigation for more than about half an hour at a time, yes. If you use the phone for music and the occasional call, a passive mount and a cable in the console is cheaper, cooler, and more reliable.
Step 4: match the arm length to your dashboard depth
This is the step people skip and then regret. Sit in the driver’s seat, put your hand where you want the phone to be, and look at how far that is from where the mount will attach. A deep truck dash needs a telescoping arm. A small hatchback is better served by a compact mount that does not stick out into your view.
Getting it installed so it stays installed
- Clean with isopropyl alcohol, not glass cleaner. Glass cleaner leaves a film that suction cups slide on. Alcohol leaves nothing.
- Mount when the car is warm, not hot and not freezing. Suction cups and adhesive pads both set better around room temperature. Adhesive in particular needs a warm surface to bond properly.
- Press and hold. For an adhesive pad, press firmly for thirty seconds and then leave it alone for a day before hanging a phone on it. Most adhesive failures are impatience.
- Wash the gel pad instead of replacing the mount. When a suction cup starts letting go, rinse the pad in warm water, let it air dry completely, and it grips again. Do not use soap or solvents on it.
- Check the vent clip after the first week. Plastic vent fins can flex permanently under sustained load. If the fin is visibly bent, move the mount to a different vent or switch to a dash mount before the fin breaks.
- Take the phone with you. A phone visible on a windshield mount in a parking lot is an advertisement. Take it and, ideally, take the mount down too if you are parking somewhere you would not leave a bag on the seat.
Frequently asked questions
Will a magnetic mount damage my phone?
No. Phone storage is solid-state flash memory, not magnetic, so a magnet cannot erase it. Modern phones also shield their compass and wireless radios adequately. The one real caveat is credit and hotel key cards, which do still use magnetic stripes in places — do not keep one sandwiched between your phone and a magnetic mount.
Do MagSafe mounts work with Android phones?
Not out of the box, with two exceptions. Some newer Android phones and cases support Qi2, which uses the same magnet ring, and those work directly. Otherwise you stick a metal ring or plate onto the case, which works but adds thickness and can interfere with wireless charging through the case.
Why does my phone charge so slowly on a wireless car charger?
Almost always heat. The phone measures its own temperature and reduces the charging rate to protect the battery. In a warm car with a bright screen and navigation running, a wireless charger can end up barely keeping up. This is why actively cooled mounts exist, and why a cable is still faster if speed is all you care about.
Is a windshield mount legal?
It depends on where you are. Several states have laws restricting objects that obstruct the driver’s view through the windshield, and a few specifically limit where a device may be placed or prohibit windshield mounting outright. Enforcement is inconsistent and the rules change, so check your own state’s current vehicle code. A dash, vent, or cup holder mount avoids the question entirely.
Vent mount or dash mount — which is better?
Vent mounts are faster to install, need no cleaning or adhesive, and put the phone high without touching the glass, but they blow conditioned air across your phone and depend on your vent fins being the right shape. Dash and windshield mounts give you free choice of position and hold more weight, but need a clean surface and a bit of setup. If your vents are horizontal and solid, start with a vent mount.
How long should a car phone mount last?
A good one should last years. The parts that fail are the suction cup gel pad, which is washable and recoverable, the adhesive pad, which is usually replaceable, and the spring in a mechanical cradle, which is the genuine wear item. Cheap mounts fail at the ball joint, which goes loose and cannot be fixed — that is the single best reason not to buy the cheapest mount on the page.
So what should you buy?
For most people the iOttie Easy One Touch Signature is the right buy, and the nearly fifty thousand ratings behind it are not an accident: the one-touch cradle and the washable gel pad address the two failure modes that make people abandon mounts. If you carry a MagSafe iPhone and your vents have horizontal fins, the ESR MagSafe Car Mount is a more pleasant daily experience and worth choosing on that basis alone. If you navigate for long stretches, the ESR CryoBoost charger is the version of that idea that actually delivers its rated power instead of throttling. And if your windshield is off limits, the cup holder mount gives you the most rigid anchor in the vehicle at the cost of a little wobble and one cup holder.
Whichever you choose, remember that the mount is a safety device before it is a convenience. Set your destination before you move, mount the phone where a glance costs you a fraction of a second, and keep it out of the airbag’s path. The best mount in the world does not make looking at a screen while driving safe — it just makes the unavoidable glances shorter.
Also worth reading: our guide to the best wireless chargers.
Shopping for a gift? See the best gifts for car people.

