BuyerRank is reader-supported. We may earn a commission when you buy through links on this page, at no extra cost to you. As an Amazon Associate, we earn from qualifying purchases. Prices and availability are accurate as of the date of publication and can change at any time — please check the retailer for the current price. Learn more. Written by Victoria — how we choose what to recommend.
Our quick picks
Ranked by what each one is best at, not by a score we made up. Ratings are what the product showed on Amazon when we last checked — how we rank.
- Low profile means the frame is long, so it needs room to be manoeuvred and it can catch on steep driveway transitions.
- Check your car’s minimum clearance against the jack’s minimum saddle height before ordering, because low-profile is a range rather than a guarantee.
- It is heavy, and a three-ton steel jack is not something to carry – this is a garage jack.
- Aluminum jacks are also less tolerant of being dragged across rough concrete than steel ones.
- Check the minimum saddle height against your lowest car.
- Aluminum costs more per ton of capacity than steel, and you are paying for the weight saving rather than extra strength.
- Build quality is good for the money and not on the level of the Arcan; expect more play in the handle and a rougher finish.
- Casters on budget jacks are the first thing to wear.
- It is a standard-height rather than a low-profile jack on many variants, so check the minimum saddle height against your car – this is the most common complaint about budget jacks and it is a fitment issue rather than a fault.
- It is a low-profile three-ton design, so it combines the clearance for modern cars with useful capacity, and it is the value option among fast-lift jacks.
- Look for a stated ASME PALD compliance and read recent reviews specifically for leaks and for the release valve.
- This is a generic listing rather than an established tool brand, and with a lifting device that matters more than with most products – parts, seal kits and warranty support are uncertain in five years, and there is no long track record behind the engineering.
- Rubber saddles wear and eventually need replacing, and a worn saddle should not be used bare.
- The low profile frame is long, so check it clears your driveway lip.
- As with all aluminum jacks, you pay a premium for the weight saving.
- Higher capacity stands are taller at minimum height, so check the minimum height fits under your car after jacking.
- Inspect the ratchet teeth and the pin before each use, and replace stands that show wear – they cost very little compared with the alternative.
- Stands must be used in pairs on level solid ground at the vehicle’s designated support points, and the vehicle must be lowered onto them and then tested by pushing before you go under.
Everything below is the why: the specifications that settle the choice, and where each pick falls down.
A floor jack’s tonnage is a lifting rating. It is not a rating for holding a vehicle up while you lie underneath it, and no floor jack of any capacity or price is designed for that job. Jacks lift; jack stands hold. Every year people are killed and seriously injured under cars supported only by a jack, and the mechanism is always the same — a hydraulic seal weeps, a release valve is knocked, the jack rolls slightly on an uneven floor, or the saddle slips off the lifting point. The load comes down and there is no time to move.
So the first thing to understand about buying a floor jack is that it is half a purchase. The other half is a pair of jack stands rated for the load, and we have included both in this guide rather than pretending the jack is the whole story.
The second thing is that the two numbers which decide whether a jack actually works on your car are not the tonnage. They are the minimum saddle height — how low the jack sits when fully lowered, which determines whether it slides under your car at all — and the maximum lift height, which determines whether it can raise the wheel clear of the ground and get high enough to place a stand. A three-ton jack that will not fit under a lowered hatchback is useless, and a jack that fits under a truck may not lift it high enough to be worth using.
Every product below is a current Amazon listing rated 4.7 stars or better. We do not publish prices — they change constantly — so use the links to check what each costs now.
Safety: read all of this, every time
The rules that are not negotiable
- Never get any part of your body under a vehicle supported only by a jack. Lift with the jack, place jack stands, lower the vehicle onto the stands, and then check the vehicle is stable by pushing it firmly before you go anywhere near underneath it. Leave the jack in place lightly touching as a backup, but the stands carry the load.
- Work on level, solid ground. Concrete. Not a slope, not gravel, not grass, not asphalt on a hot day — jack and stand feet sink into soft asphalt and the vehicle tips. If you must work on tarmac in heat, put steel plates or thick plywood under the jack and stands.
- Chock the wheels that stay on the ground, on both sides where possible, and apply the parking brake. On a manual, leave it in gear; on an automatic, leave it in park. Chock before you lift, not after.
- Use the vehicle’s designated lifting points. They are in the owner’s manual, and they are reinforced for exactly this. Lifting on a floor pan, a sill panel, a suspension arm or a plastic undertray damages the car and can let the saddle slip. Many unibody cars have pinch welds; a pinch weld adapter on the saddle prevents crushing them.
- Never exceed the rated capacity, and understand what you are actually lifting: jacking one corner lifts roughly a quarter to a third of the vehicle’s weight, but lifting the whole front end lifts more than half. Buy margin.
- Lower slowly and deliberately, with everything and everyone clear. Most release valves are sensitive; open them a fraction at a time.
- Never use a jack as a press, a puller or a support for anything other than lifting a vehicle, and never leave a car on a jack overnight.
Checks before each use
- Look for oil on the ram and around the pump. A weeping hydraulic jack is a jack that will not hold; retire it or have it serviced.
- Check the saddle is not cracked and that the rubber pad is present.
- Check the wheels and casters roll freely and the handle socket is not sloppy.
- Pump it to full height with no load and let it stand a minute — if it settles, do not use it.
- For jack stands: check the ratchet bar teeth are not worn or chipped, the pawl engages fully, and the locking pin is present. Stands are cheap and worn stands are not worth keeping.
One standard worth looking for
Portable automotive lifting devices in the US are covered by an ASME standard (ASME PALD), and reputable manufacturers state compliance. It is not a guarantee of quality but its absence on an otherwise unbranded jack tells you something about the level of engineering documentation behind it. Given what a jack is for, that is worth a moment of checking.
Quick picks
- Best overall: ARCAN 3-Ton Steel Low Profile A20003 — low enough for modern cars, built like a workshop jack.
- Best lightweight, and best bundle: SUNEX Aluminum 3-Ton Jack Pack — half the weight of steel and it includes a pair of 3-ton stands.
- Best value: BIG RED Torin T830025 — a 3-ton steel jack with a safety bypass system, at a fraction of the premium price.
- Best fast lift: 3-Ton dual-piston low profile jack — the quickest to get a car up, if you are lifting often.
- Best aluminum alternative: YELLOW JACKET 3-Ton low profile — dual pump and a large rubber saddle.
- Buy these too: Pro-Lift 6-Ton jack stands — the half of this purchase that keeps you alive.
Steel or aluminum?
Steel jacks are cheaper for the same capacity, they are extremely durable, and they are heavy — a three-ton steel floor jack is a genuine lift in and out of a car boot, and if it lives in a garage that does not matter at all. Aluminum jacks cost noticeably more and weigh roughly half as much, which is what you want if the jack travels to track days, to a friend’s driveway, or has to come out of a cupboard and up a step. There is no meaningful safety difference between good examples of either; it is a weight-versus-cost decision.
The six things worth buying
1. ARCAN 3-Ton Steel Low Profile A20003 — best overall
Arcan jacks have a following among people who actually work on cars, and the A20003 is the reason. It is a three-ton steel low-profile jack, which is the right combination for almost any driveway: the low-profile frame slides under modern cars with low front air dams, and the three-ton capacity gives you real margin on anything from a hatchback to a mid-size SUV. Arcan reinforces the chassis with high-carbon steel side plates, which is what stops a frame flexing under load over years — frame flex is what turns a cheap jack into a jack that sits crooked and lets the saddle drift.
It handles like a workshop tool rather than a boot accessory: it rolls where you push it, the handle does not bind, and the lift is smooth. At 4.7 stars from a large owner base, this is the one we would buy and keep for twenty years.
What you give up: it is heavy, and a three-ton steel jack is not something to carry — this is a garage jack. Low profile means the frame is long, so it needs room to be manoeuvred and it can catch on steep driveway transitions. Check your car’s minimum clearance against the jack’s minimum saddle height before ordering, because low-profile is a range rather than a guarantee. And it does not come with jack stands, which per the safety section you must buy separately.
Check the ARCAN A20003 on Amazon →
2. SUNEX Aluminum 3-Ton Jack Pack — best lightweight, and best bundle
This is the pick we would push hardest, and the reason is in the box: it includes a pair of three-ton aluminum jack stands with the jack. Given that the most important message in this guide is that a jack alone is half a purchase, a package that ships both is not a bundle gimmick — it is the correct product. The number of people who buy a jack, mean to buy stands later, and get under a car in the meantime is not small.
The jack itself is good: an aluminum body at nearly half the weight of steel, so it can be carried and lifted into a car, and Rapid-Rise dual pump pistons so it reaches the car in fewer strokes. Sunex is a professional tool brand rather than a house label. At 4.7 stars, for anyone whose jack needs to travel — track days, autocross, helping family — this is the set to buy.
The part that annoys people: aluminum costs more per ton of capacity than steel, and you are paying for the weight saving rather than extra strength. Aluminum jacks are also less tolerant of being dragged across rough concrete than steel ones. Check the minimum saddle height against your lowest car. And while the included stands are the right idea, confirm their height range suits your vehicle — stands that will not go high enough are as useless as a jack that will not lift far enough.
Check the SUNEX Jack Pack on Amazon →
3. BIG RED Torin T830025 — best value
If you need a jack for changing wheels, swapping to winter tires and the occasional brake job, and you are not going to spend premium money on a tool you use four times a year, this is the sensible answer. It is a heavy-duty steel three-ton hydraulic garage jack with a single quick-lift pump, and the detail worth noting is the safety bypass system, which prevents the jack being overloaded beyond its rated capacity and is exactly the kind of engineering you want present rather than absent in a lifting device.
Torin’s BIG RED line has been the default budget jack in American garages for a long time, at 4.7 stars, and the parts and seal kits are widely available — which matters, because a hydraulic jack is a serviceable item rather than a disposable one.
Where it disappoints: it is a standard-height rather than a low-profile jack on many variants, so check the minimum saddle height against your car — this is the most common complaint about budget jacks and it is a fitment issue rather than a fault. Build quality is good for the money and not on the level of the Arcan; expect more play in the handle and a rougher finish. Casters on budget jacks are the first thing to wear. And again: no stands included.
Check the BIG RED T830025 on Amazon →
4. 3-Ton dual-piston low profile jack — best fast lift
At 4.8 stars this is the highest-rated jack we found, and its selling point is speed: a dual-piston pump moves far more fluid per stroke than a single one, so the saddle reaches the car in a handful of pumps instead of twenty. If you lift cars regularly — rotating tires on two vehicles, seasonal tire changes, regular brake work — that difference is the one you feel every time, because most of the effort in using a floor jack is the empty travel before it touches the car.
It is a low-profile three-ton design, so it combines the clearance for modern cars with useful capacity, and it is the value option among fast-lift jacks.
The drawbacks: this is a generic listing rather than an established tool brand, and with a lifting device that matters more than with most products — parts, seal kits and warranty support are uncertain in five years, and there is no long track record behind the engineering. Look for a stated ASME PALD compliance and read recent reviews specifically for leaks and for the release valve. Treat the high rating as evidence about the first year of ownership. If you want a fast-lift jack from a known brand instead, the Sunex and Yellow Jacket options here both use dual pumps.
Check the dual-piston low profile jack on Amazon →
5. YELLOW JACKET 3-Ton low profile — best aluminum alternative
This is the other good aluminum option, and two details distinguish it. The dual-piston pump gives the same fast lift as our fourth pick, and the saddle is a large rubber pad rather than a bare steel cup — which matters because a large soft saddle spreads the load across a pinch weld or a jack pad instead of concentrating it on a small area, and that is how sills get crushed. It also has a foam-padded handle, which sounds cosmetic and is not: a bare steel handle bangs against paintwork and against your knuckles.
At 4.7 stars, with low profile clearance and three-ton capacity, it is a well-judged combination for someone who wants a light jack without buying a professional bundle.
The catch: as with all aluminum jacks, you pay a premium for the weight saving. Rubber saddles wear and eventually need replacing, and a worn saddle should not be used bare. The low profile frame is long, so check it clears your driveway lip. And once more: no stands in the box.
Check the YELLOW JACKET jack on Amazon →
6. Pro-Lift 6-Ton jack stands, pair — the other half of the purchase
These are not an accessory. They are the product that makes working under a car survivable, and they are the cheapest part of this entire guide. Pro-Lift’s six-ton pair uses stamped steel construction with a cast ductile iron ratchet bar — ductile iron rather than cast iron matters, because it deforms rather than shattering under shock — and a double locking safety system with both a handle lock and a separate locking pin. Two independent locks on a device whose only job is not to let go is the correct design.
Six tons for a pair is generous for cars and gives you real margin, which is the right way to buy stands. At 4.8 stars they are the best-rated stands we found.
Where it falls short: stands must be used in pairs on level solid ground at the vehicle’s designated support points, and the vehicle must be lowered onto them and then tested by pushing before you go under. Higher capacity stands are taller at minimum height, so check the minimum height fits under your car after jacking. Inspect the ratchet teeth and the pin before each use, and replace stands that show wear — they cost very little compared with the alternative. And never stack anything under a stand to gain height.
Check the Pro-Lift 6-ton jack stands on Amazon →
Second tier
Pro-Lift T-6906D double pin 6-ton jack stand at 4.8 stars is the same family with a double-pin design for anybody who prefers a pinned stand to a ratchet bar. Either style is fine when used correctly; what matters is that the locking mechanism is positive and that you inspect it.
Check the Pro-Lift double pin stand on Amazon →
How to choose, in the right order
- Measure the clearance at your car’s jacking point, at the lowest part the jack must pass under. Compare it with the jack’s minimum saddle height. This eliminates most of the market for a lowered or low-slung car.
- Work out how high you need to go: enough to get the wheel clear and to place a stand at its lowest usable setting. Check the jack’s maximum lift height against that.
- Then capacity. Two tons covers most cars; three tons is the sensible default for margin and small SUVs; a full-size truck or van wants more. Buy above what the arithmetic says.
- Then steel or aluminum, based purely on whether the jack has to be carried.
- Then the pump. Dual piston or rapid-rise if you lift often; single pump is fine for a few times a year.
- Then buy the stands, rated with margin, and a pinch weld adapter if your car has pinch welds.
- Finally, buy wheel chocks. They cost almost nothing and they are part of doing this properly.
Frequently asked questions
Is the jack that came with my car not enough?
For a roadside wheel change on a flat verge, the scissor jack in the boot is what it is designed for and it works. It is slow, unstable, awkward and not intended for anything else. It is not a substitute for a floor jack for maintenance work, and it is definitely not something to get under a car with. Keep it in the boot and buy a floor jack for the driveway.
How many jack stands do I need?
At least two, used as a pair, and four if you intend to lift the whole car. Never support one side on a stand and the other on a jack or on anything improvised. If you are lifting all four corners, work in stages, chocking as you go, and check stability at each step.
Can I use a jack on a sloped driveway?
No. The load on a jack must be vertical; on a slope the vehicle wants to roll and the jack wants to tip, and both happen suddenly. Find level ground, even if that means moving the car. If your only space is sloped, that is a job for a garage rather than a compromise.
Why does my jack not hold pressure any more?
Usually a worn seal or air in the hydraulic system. Bleeding the jack — opening the filler, working the pump with the release open, following the manufacturer’s procedure — fixes air. Seals need a rebuild kit, which is available for most reputable brands and is a reasonable job. What you should not do is keep using a jack that settles under load, whatever the cause.
Do I need a pinch weld adapter?
If your car has pinch welds as its designated jacking points — most unibody cars do — then yes, it is worth the few pounds. A bare saddle concentrates the whole load on a thin double-thickness of sheet steel and bends it. A slotted rubber or polyurethane adapter spreads the load and locates the jack so it cannot slip sideways.
How should I store it?
Fully lowered, with the release valve closed, in a dry place, and ideally flat rather than on its side — storing a hydraulic jack on its side can let air into the wrong part of the system on some designs. Wipe the ram, keep it clean, and top up the hydraulic fluid to the manufacturer’s specification rather than with whatever oil is in the shed.
So what should you buy?
For a garage, buy the ARCAN A20003 — it is the jack that feels like a tool rather than a purchase, and three-ton low profile suits almost every car. If the jack has to travel or be carried, the SUNEX Aluminum Jack Pack is the one we would recommend most readily, because it ships with the stands and therefore with the safety. On a budget, the BIG RED T830025 does the job properly and parts are available. If you lift often, a dual-piston pump saves real effort.
And whichever jack you choose, buy the jack stands in the same order. Lift with the jack, lower onto stands, push the car to test it, and only then get underneath. That sequence is the entire difference between a routine job and the worst outcome in home mechanics.
Also worth reading: our guides to portable tire inflators and OBD2 scanners.
Also worth reading: our guide to the best air compressors.
Shopping for a gift? See the best gifts for a new homeowner.
Shopping for a gift? See the best gifts for car people.

